Brother MFC L6900DWX ADF D0016R001 Rolller Replacement Guide
Brother MFC L6900DWX ADF D0016R001 Rolller Replacement Guide
Below you will find the Brother MFC L6900DWX ADF D0016R001 Rolller Replacement Guide followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
An additional well-known trouble with these pads would be that they could end up being detached out of the holder assembly. During these moments, the paper knocks the upper lip of the holder as it feeds within and causes the documents to jam up right beneath the roller assembly. Ultimately, replacing of the separation pad is required after this occurs.
Of course several technicians always like to replace both parts at the same time. So below I’ve listed both parts for order. Now if you merely have 50,000 pages from the ADF or if you aren’t tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother MFC L6900DWX cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L6900DWX Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC L6900DWX Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC L6900DWX separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
