Brother MFC L6702DW ADF D0016R001 Rolller Repair Advice
Below you will find the Brother MFC L6702DW ADF D0016R001 Rolller Repair Advice followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Another recognized difficulty with these pads is that they may end up being detached from the holder assembly. At this point, the papers knocks the top lip of the plate as it feeds through and causes the document to jam up right under the roller assembly. Obviously, replacement of the separation pad becomes necessary after this happens.
Now some techs choose to change both parts simultaneously. So listed below I have provided both parts for purchase. Now if you merely have 50,000 pages through the ADF or if you aren’t technical savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother MFC L6702DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L6702DW Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC L6702DW Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC L6702DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
