Brother MFC L6750DW ADF D0016R001 Rolller Replacement Instructions
Brother MFC L6750DW ADF D0016R001 Rolller Replacement Instructions
Below you will find the Brother MFC L6750DW ADF D0016R001 Rolller Replacement Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Another known problem with this type of pads would be that they could end up being removed from the holder assembly. At this point, the paper bites the upper lip of the plate as it passes through and causes the papers to jam up right under the roller assembly. Typically, replacement of the separation pad is essential once this occurs.
Of course numerous technicians prefer to swap both parts at the same time. So down the page I’ve listed both parts for order. Now if you only have 50,000 pages through the ADF or if you are not tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother MFC L6750DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L6750DW Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC L6750DW Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC L6750DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
