Brother MFC L5900DW ADF D0016R001 Rolller Replacement Advice
Brother MFC L5900DW ADF D0016R001 Rolller Replacement Advice
Below you will find the Brother MFC L5900DW ADF D0016R001 Rolller Replacement Advice followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
One more acknowledged problem with these pads is that they could come to be separated with the holder assembly. If this occurs, the document touches the upper lip of the plate as it passes over and causes the paper to jam up right inside of the roller assembly. Without doubt, replacement of the separation pad is needed once this takes place.
Now several techs choose to remove and replace both parts simultaneously. So below I’ve listed both parts for order. Now if you only have 50,000 pages through the ADF or if you aren’t tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother MFC L5900DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L5900DW Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC L5900DW Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC L5900DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
