Brother MFC L6900DWG ADF D0016R001 Rolller Repair Instructions
Brother MFC L6900DWG ADF D0016R001 Rolller Repair Instructions
Below you will find the Brother MFC L6900DWG ADF D0016R001 Rolller Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Another identified downside to this type of pads is that they could come to be detached with the holder assembly. At this point, the paper knocks the top lip of the holder as it feeds over and causes the paper to jam up right inside of the roller assembly. Basically, replacement of the separation pad is essential after this happens.
Of course numerous techs like to exchange both parts at the same time. So listed below I’ve provided both parts for purchase. Now if you merely have 50,000 pages through the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC L6900DWG cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L6900DWG Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC L6900DWG Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC L6900DWG separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
