Brother MFC L6900DW ADF D0016R001 Rolller Replacement Advice
Brother MFC L6900DW ADF D0016R001 Rolller Replacement Advice
Below you will find the Brother MFC L6900DW ADF D0016R001 Rolller Replacement Advice followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Another identified trouble with these pads would be that they could come to be unattached with the holder assembly. When this happens, the papers strikes the top lip of the holder as it feeds over and causes the documents to jam up right inside of the roller assembly. Normally, replacement of the separation pad is necessary once this takes place.
Of course numerous techs choose to change both parts simultaneously. So down the page I’ve listed both parts for purchase. Now if you only have 50,000 pages from the ADF or if you are not tech savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC L6900DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L6900DW Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC L6900DW Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC L6900DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
