Brother MFC L6902DW Document Jam Repair Advice
Below you will find the Brother MFC L6902DW Document Jam Repair Advice followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Yet another known trouble with these pads is that often they can become separated from the holder assembly. At this point, the paper hits the upper lip of the holder as it feeds through and results in the paper to jam up right underneath the roller assembly. Plainly, replacing of the separation pad is necessary as soon as such a thing happens. Lots of people believe the feed rollers are the problem because the pad goes missing in action and when they search in there they don’t view it so they don’t it should be there. Hence they presume the feed roller. However, it’s often just as simple as investing in a new separation pad.
Of course several technicians choose to upgrade both parts at the same time. So below I have included both parts for purchase. Now if you merely have 50,000 pages through the ADF or if you aren’t tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother MFC L6902DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L6902DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.