Brother DCP L5500D ADF D0016R001 Rolller Repair Instructions
Below you will find the Brother DCP L5500D ADF D0016R001 Rolller Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Yet another well-known trouble with these particular pads is the fact they could end up being separated out of the holder assembly. If this happens, the documents strikes the upper lip of the holder as it passes within and causes the documents to jam up right underneath the roller assembly. Basically, replacement of the separation pad is necessary once such a thing happens.
Currently numerous technicians choose to swap both parts simultaneously. So down below I’ve included both parts for purchase. Now if you only have 50,000 pages from the ADF or if you aren’t tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother DCP L5500D cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5500D Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother DCP L5500D Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother DCP L5500D separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
