Brother MFC L6900DWG Document Jam Repair Instructions
Below you will find the Brother MFC L6900DWG Document Jam Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
One more identified downside to these pads is that often they can become detached from the holder assembly. When this occurs, the paper contacts the upper lip of the holder as it feeds through and results in the paper to jam up right under the roller assembly. Plainly, replacement of the separation pad is required as soon as this occurs. Lots of individuals believe the feed rollers are the problem because the pad gets lost in action and when they search in there they don’t notice so they don’t it should be there. Hence they assume the feed roller. However, it’s often just as simple as installing a new separation pad.
Of course numerous techs like to exchange both parts at the same time. So listed below I’ve provided both parts for purchase. Now if you merely have 50,000 pages through the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC L6900DWG cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L6900DWG separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.