Brother MFC L6800DW Document Jam Repair Guide
Below you will find the Brother MFC L6800DW Document Jam Repair Guide followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
One more acknowledged challenge with these pads is that often they can become separated from the holder assembly. When this happens, the paper hits the top of the lip of the holder as it feeds through and causes the paper to jam up right underneath the roller assembly. Plainly, replacement of the separation pad is necessary at the time this happens. Lots of individuals think the feed rollers are the problem because the pad gets lost in action and when they look in there they don’t view it so they don’t it should be there. Hence they assume the feed roller. However, it’s usually just as simple as investing in a new separation pad.
Of course numerous techs always like to replace both parts at the same time. So down the page I have listed both parts for order. Now if you merely have 50,000 pages from the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC L6800DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L6800DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
