Brother MFC L6750DW Document Jam Repair Instructions
Below you will find the Brother MFC L6750DW Document Jam Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Another well-known issue with these pads is that often they might become detached from the holder assembly. If this occurs, the paper strikes the upper lip of the holder as it passes through and results in the paper to jam up right under the roller assembly. Plainly, replacement of the separation pad is necessary at the time this happens. A lot of people assume the feed rollers are the problem because the pad gets lost in action and when they search in there they don’t notice so they don’t it should be there. Hence they consider the feed roller. However, it’s often just as simple as putting in a fresh separation pad.
Of course numerous technicians prefer to swap both parts at the same time. So down the page I’ve listed both parts for order. Now if you only have 50,000 pages through the ADF or if you are not tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother MFC L6750DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L6750DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.