Canon imageRUNNER 1730iF E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730iF E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 1730iF E014 0002 Error Code
E014 0002
Description :
Fixing Motor (M1) rotation error
Causes :
Detection was performed every 100 msec during the drive (after the lock detection) and the lock signal was not detected 5 times in a row (in 500 msec).
Solutions :
1. Check the connector connection between the Fixing Motor and the DC Controller PCB (J203).
2. Replace the Fixing Motor (M1).
3. Replace the DC Controller PCB (PCB1).
Bear in mind, not every error is absolutely the same. What remedies the issue one time might not eliminate it the next time. While the information in this document originates from the service manual and oftentimes should get your piece of equipment operational, on occasion other variables could possibly be in play.
If you are looking at this piece of content and have exposure to this error message and desire to share please leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the problem then I will reply.
