Canon imageRUNNER 1730iF E202 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730iF E202 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730iF E202 0000 Error Code
E202 0000
Description :
CIS home position detection error
Causes :
1. Error when moving to the left side for HP check operation
2. Error when moving to the right side for HP check operation
Solutions :
1. Disconnect and then connect the Flexible Cable (Reader Controller PCB (PCB3) – Main Controller PCB (PCB2) 31pin).
2. Replace the Flexible Cable.
3. Replace the CIS HP Sensor (PS24).
4. Replace the Reader Motor (M10).
5. Replace the Reader Controller PCB (PCB3).
6. Replace the Main Controller PCB (PCB2).
Bear in mind, not every error is entirely alike. What treats the problem one occasion may possibly not solve it the next time. While the tips in this writing derives from the service manual and normally ought to get your unit operating, sometimes other variables can be in play.
If you are looking at this post and have experience with this error and wish to share be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will answer back.