Samsung ProXpress M3370FD Fuser Replacement Instructions
Samsung ProXpress M3370FD Fuser Replacement Instructions – Below you likely will discover the illustrated fuser replacement steps. These fusers are rated at roughly 90,000 pages. Traditional signs or symptoms of worn out fusers are wrinkles or indents on the pages, open, low, or high heat errors, and a variety of print quality difficulties. These fusers are actually easy to pull out so it doesn’t do any harm to take a couple of minutes to take it out and go through it if you are coming across issues you may possibly think are related to it.
Samsung ProXpress M3370FD Fuser Replacement Instructions
1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.
M3370 fuser replacement 1of2
M3370 fuser replacement 1of2.
M3370 fuser replacement 2 of 2
M3370 fuser replacement 2 of 2.