Samsung ML-3312ND Fuser Replacement Procedure
Samsung ML-3312ND Fuser Replacement Procedure – Below you can obtain the illustrated fuser replacement tips. These fusers are rated at around 90,000 pages. Regular evidence of old fusers are creases or indents on the pages, open, low, or high heat errors, and a variety of print quality conditions. These fusers are fairly simple to take out so it wouldn’t do any harm to take a few minutes to take it out and go over it if you are observing issues you may perhaps think are associated to it.
Samsung ML-3312ND Fuser Replacement Procedure
1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.
Samsung ProXpress M4070FR M4020ND M3870FW M3820ND M3370FD Fuser Unit JC91-01023A
M3370 fuser replacement 1of2
M3370 fuser replacement 1of2.
M3370 fuser replacement 2 of 2
M3370 fuser replacement 2 of 2.