Samsung ProXpress M3870FW Fuser Replacement Details
Samsung ProXpress M3870FW Fuser Replacement Details – Below you will acquire the illustrated fuser replacement tips. These fusers are graded at more or less 90,000 pages. Normal issues of worn fusers are creases or indents on the pages, open, low, or high heat errors, and various sorts of print quality difficulties. These fusers are very easy to pull out so it wouldn’t do any harm to take a couple of minutes to take it out and analyze it if you are encountering conditions you may think are relevant to it.
Samsung ProXpress M3870FW Fuser Replacement Details
1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.
