Samsung ML-3750ND Fuser Replacement Pointers

 

Samsung ML-3750ND Fuser Replacement Pointers

Samsung ML-3750ND Fuser Replacement Pointers – Below you likely will discover the illustrated fuser replacement instuctions. These fusers are ranked at roughly 90,000 pages. General indications of worn out fusers are wrinkles or indents on the pages, open, low, or high heat errors, and many kinds of print quality concerns. These fusers are extremely uncomplicated to take out so it wouldn’t do any harm to take a couple of minutes to take it out and inspect it if you are witnessing ailments you might think are relevant to it.

Samsung JC91-01023A Fuser

$178.74  in stock
2 new from $178.74
Amazon.com
as of June 10, 2021 8:40 am

Features

  • This Is An O.E.M. Authorized Part
  • Fits With Various Samsung Brand Models
  • Oem Part # Jc91-01023A
  • Brand Name: Samsung

Samsung ML-3750ND Fuser Replacement Pointers

1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.

Samsung ML-3750ND Fuser Replacement
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.