Brother MFC L5800DW ADF D0016R001 Rolller Repair Advice
Below you will find the Brother MFC L5800DW ADF D0016R001 Rolller Repair Advice followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
One more identified downside to these pads would be that they might come to be removed out of the holder assembly. During these moments, the documents strikes the upper lip of the plate as it feeds within and causes the document to jam up right underneath the roller assembly. Normally, replacement of the separation pad becomes necessary once this takes place.
Now several technicians always like to swap both parts simultaneously. So down the page I’ve included both parts for purchase. Now if you merely have 50,000 pages through the ADF or if you aren’t technical savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother MFC L5800DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L5800DW Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC L5800DW Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC L5800DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
