Brother MFC L5750DW ADF D0016R001 Rolller Repair Instructions
Brother MFC L5750DW ADF D0016R001 Rolller Repair Instructions
Below you will find the Brother MFC L5750DW ADF D0016R001 Rolller Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
One more noted problem with these pads is that they might end up being removed with the holder assembly. At these times, the document bites the upper lip of the holder as it feeds over and causes the documents to jam up right below the roller assembly. Typically, replacing of the separation pad is required once this happens.
Now numerous techs prefer to remove and replace both parts simultaneously. So down below I have provided both parts for order. Now if you only have 50,000 pages through the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC L5750DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L5750DW Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC L5750DW Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC L5750DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
