Brother MFC L5702DW ADF D0016R001 Rolller Replacement Guide
Below you will find the Brother MFC L5702DW ADF D0016R001 Rolller Replacement Guide followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
One more recognized challenge with these pads would be that they could end up being removed out of the holder assembly. When this occurs, the document touches the upper lip of the holder as it feeds through and causes the documents to jam up right under the roller assembly. Typically, replacement of the separation pad is essential after this happens.
Now numerous techs choose to exchange both parts at the same time. So listed below I’ve provided both parts for order. Now if you only have 50,000 pages from the ADF or if you aren’t tech savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC L5702DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L5702DW Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC L5702DW Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC L5702DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
