Brother MFC 8535DN ADF D0016R001 Rolller Replacement Instructions
Brother MFC 8535DN ADF D0016R001 Rolller Replacement Instructions
Below you will find the Brother MFC 8535DN ADF D0016R001 Rolller Replacement Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
One other well-known difficulty with these particular pads is that they can become detached with the holder assembly. At this point, the document knocks the top lip of the plate as it feeds through and causes the documents to jam up right below the roller assembly. Typically, replacing of the separation pad is essential after this takes place.
Currently some technicians always like to replace both parts simultaneously. So below I’ve listed both parts for purchase. Now if you only have 50,000 pages from the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC 8535DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC 8535DN Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC 8535DN Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC 8535DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
