Brother MFC 8530DN ADF D0016R001 Rolller Repair Advice
Below you will find the Brother MFC 8530DN ADF D0016R001 Rolller Repair Advice followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
One other well-known trouble with this type of pads is that they could become removed out of the holder assembly. At this point, the documents strikes the upper lip of the holder as it feeds over and causes the paper to jam up right under the roller assembly. Clearly, replacement of the separation pad is essential once this takes place.
Currently several technicians prefer to upgrade both parts simultaneously. So listed below I’ve listed both parts for order. Now if you only have 50,000 pages through the ADF or if you are not technical savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother MFC 8530DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC 8530DN Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother MFC 8530DN Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother MFC 8530DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
