Brother DCP L5652DN ADF D0016R001 Rolller Repair Instructions
Below you will find the Brother DCP L5652DN ADF D0016R001 Rolller Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Yet another known difficulty with these particular pads would be that they may become separated from the holder assembly. When this happens, the document touches the top lip of the holder as it passes over and causes the papers to jam up right under the roller assembly. Ultimately, replacing of the separation pad is needed after this happens.
Currently several technicians like to upgrade both parts at the same time. So down the page I have provided both parts for order. Now if you merely have 50,000 pages through the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother DCP L5652DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5652DN Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother DCP L5652DN Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother DCP L5652DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.