Brother DCP L5650DN ADF D0016R001 Rolller Replacement Advice
Brother DCP L5650DN ADF D0016R001 Rolller Replacement Advice
Below you will find the Brother DCP L5650DN ADF D0016R001 Rolller Replacement Advice followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Yet another known issue with these particular pads is the fact they might end up being separated with the holder assembly. If this happens, the documents touches the top lip of the holder as it feeds over and causes the document to jam up right underneath the roller assembly. Ultimately, replacing of the separation pad is required after this happens.
Currently numerous techs prefer to remove and replace both parts at the same time. So listed below I’ve included both parts for purchase. Now if you only have 50,000 pages through the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother DCP L5650DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5650DN Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother DCP L5650DN Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother DCP L5650DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
