Brother DCP L5602DN ADF D0016R001 Rolller Repair Guide
Below you will find the Brother DCP L5602DN ADF D0016R001 Rolller Repair Guide followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Yet another noted challenge with these pads is that they might end up being separated out of the holder assembly. When this happens, the documents knocks the upper lip of the holder as it passes within and causes the paper to jam up right underneath the roller assembly. Ultimately, replacing of the separation pad is necessary after this occurs.
Currently numerous techs prefer to change both parts at the same time. So listed below I’ve included both parts for purchase. Now if you only have 50,000 pages from the ADF or if you aren’t tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother DCP L5602DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5602DN Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother DCP L5602DN Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother DCP L5602DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
