Brother DCP L5600DN ADF D0016R001 Rolller Replacement Instructions
Brother DCP L5600DN ADF D0016R001 Rolller Replacement Instructions
Below you will find the Brother DCP L5600DN ADF D0016R001 Rolller Replacement Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Yet another noted issue with these particular pads is the fact they may come to be detached out of the holder assembly. If this occurs, the paper bites the upper lip of the plate as it feeds within and causes the papers to jam up right below the roller assembly. Typically, replacing of the separation pad is needed after such a thing happens.
Currently numerous techs like to swap both parts at the same time. So down below I’ve listed both parts for purchase. Now if you only have 50,000 pages from the ADF or if you aren’t technical savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother DCP L5600DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5600DN Gear cover, ADF front cover, Document sub tray
1. Release each hook to remove the gear cover from the ADF unit.
2. Remove the two taptite cup B M3x10 screws. Release each hook to remove the ADF
front cover from the ADF unit.
Brother DCP L5600DN Document separate roller ASSY
1. Release the lock of the conductive bushing to remove the document separate roller
ASSY from the ADF unit.
Brother DCP L5600DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
