Brother MFC L5802DW Document Jam Repair Instructions
Below you will find the Brother MFC L5802DW Document Jam Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
Another known issue with these pads is that they might become separated from the holder assembly. When this occurs, the paper bites the top of the lip of the holder as it feeds through and causes the paper to jam up right under the roller assembly. Plainly, replacing of the separation pad is required once this happens. Lots of individuals believe the feed rollers are the problem because the pad goes missing in action and when they look inside they don’t view it so they don’t it should be there. Therefore they presume the feed roller. However, it’s usually just as simple as putting in a fresh separation pad.
Now several technicians always like to upgrade both parts simultaneously. So below I have included both parts for order. Now if you only have 50,000 pages through the ADF or if you aren’t tech savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC L5802DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L5802DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
