Brother MFC L5702DW Document Jam Repair Guide
Below you will find the Brother MFC L5702DW Document Jam Repair Guide followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
An additional well-known downside to these pads is that often they may become removed from the holder assembly. At this point, the paper hits the upper lip of the holder as it feeds through and results in the paper to jam up right beneath the roller assembly. Obviously, replacement of the separation pad is needed once this happens. Many people believe the feed rollers are the problem because the pad gets lost in action and when they look inside they don’t view it so they don’t it should be there. Therefore they presume the feed roller. However, it’s usually just as simple as putting in a fresh separation pad.
Now numerous techs choose to exchange both parts at the same time. So listed below I’ve provided both parts for order. Now if you only have 50,000 pages from the ADF or if you aren’t tech savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC L5702DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC L5702DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
