Brother MFC 8535DN Document Jam Repair Instructions
Below you will find the Brother MFC 8535DN Document Jam Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
An additional acknowledged problem with these pads is the fact they might become removed from the holder assembly. At this point, the paper contacts the upper lip of the holder as it passes through and causes the paper to jam up right beneath the roller assembly. Plainly, replacement of the separation pad is required once this happens. Lots of individuals think the feed rollers are the issue because the pad gets lost in action and when they look in there they don’t see it so they don’t it should be there. Therefore they think the feed roller. However, it’s usually just as simple as installing a fresh separation pad.
Currently some technicians always like to replace both parts simultaneously. So below I’ve listed both parts for purchase. Now if you only have 50,000 pages from the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother MFC 8535DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother MFC 8535DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
