Brother DCP L6600DW Document Jam Repair Guide
Below you will find the Brother DCP L6600DW Document Jam Repair Guide followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
A further regarded problem with these pads is that often they might become detached from the holder assembly. When this occurs, the paper hits the top of the lip of the holder as it passes through and causes the paper to jam up right under the roller assembly. Obviously, replacement of the separation pad is required once such a thing happens. Lots of individuals assume the feed rollers are the problem because the pad gets lost in action and when they look inside they don’t view it so they don’t it should be there. Therefore they think the feed roller. However, it’s usually just as simple as putting in a new separation pad.
Currently several technicians prefer to remove and replace both parts at the same time. So down the page I’ve listed both parts for order. Now if you merely have 50,000 pages through the ADF or if you are not tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother DCP L6600DW cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L6600DW separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
