Brother DCP L5652DN Document Jam Repair Instructions
Below you will find the Brother DCP L5652DN Document Jam Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
A further identified problem with these pads is that often they may become detached from the holder assembly. At this point, the paper hits the upper lip of the holder as it passes through and causes the paper to jam up right inside of the roller assembly. Obviously, replacement of the separation pad is needed at the time this happens. Some people believe the feed rollers are the issue because the pad goes missing in action and when they look in there they don’t notice so they don’t it should be there. Therefore they presume the feed roller. However, it’s often just as simple as investing in a fresh separation pad.
Currently several technicians like to upgrade both parts at the same time. So down the page I have provided both parts for order. Now if you merely have 50,000 pages through the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother DCP L5652DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5652DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
