Brother DCP L5650DN Document Jam Repair Advice
Below you will find the Brother DCP L5650DN Document Jam Repair Advice followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
A further identified downside to these pads is that they may become detached from the holder assembly. When this happens, the paper strikes the top of the lip of the holder as it passes through and causes the paper to jam up right underneath the roller assembly. Plainly, replacing of the separation pad is needed as soon as this happens. Many individuals think the feed rollers are the issue because the pad gets lost in action and when they look inside they don’t see it so they don’t it should be there. Hence they presume the feed roller. However, it’s often just as simple as putting in a new separation pad.
Currently numerous techs prefer to remove and replace both parts at the same time. So listed below I’ve included both parts for purchase. Now if you only have 50,000 pages through the ADF or if you are not technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother DCP L5650DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5650DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.