Brother DCP L5602DN Document Jam Repair Guide
Below you will find the Brother DCP L5602DN Document Jam Repair Guide followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
A different well-known trouble with these pads is the fact they can become detached from the holder assembly. When this happens, the paper strikes the upper lip of the holder as it passes through and results in the paper to jam up right beneath the roller assembly. Obviously, replacing of the separation pad is required as soon as such a thing happens. Many individuals believe the feed rollers are the problem because the pad goes missing in action and when they look in there they don’t view it so they don’t it should be there. Therefore they assume the feed roller. However, it’s often just as simple as investing in a new separation pad.
Currently numerous techs prefer to change both parts at the same time. So listed below I’ve included both parts for purchase. Now if you only have 50,000 pages from the ADF or if you aren’t tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother DCP L5602DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5602DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
