Brother DCP L5600DN Document Jam Repair Instructions
Below you will find the Brother DCP L5600DN Document Jam Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
A different recognized issue with these pads is that they might become separated from the holder assembly. If this occurs, the paper hits the top of the lip of the holder as it passes through and results in the paper to jam up right inside of the roller assembly. Plainly, replacement of the separation pad is needed once such a thing happens. Many individuals assume the feed rollers are the difficulty because the pad gets lost in action and when they search inside they don’t see it so they don’t it should be there. Hence they consider the feed roller. However, it’s often just as simple as putting in a fresh separation pad.
Currently numerous techs like to swap both parts at the same time. So down below I’ve listed both parts for purchase. Now if you only have 50,000 pages from the ADF or if you aren’t technical savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother DCP L5600DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5600DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
