Brother DCP L5502DN Document Jam Repair Advice
Below you will find the Brother DCP L5502DN Document Jam Repair Advice followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
A different known challenge with these pads is that they may become detached from the holder assembly. When this happens, the paper bites the upper lip of the holder as it feeds through and causes the paper to jam up right underneath the roller assembly. Obviously, replacing of the separation pad is required once this occurs. Many people believe the feed rollers are the problem because the pad goes missing in action and when they look in there they don’t view it so they don’t it should be there. Hence they consider the feed roller. However, it’s usually just as simple as investing in a new separation pad.
Currently numerous technicians like to upgrade both parts simultaneously. So down the page I have included both parts for order. Now if you merely have 50,000 pages through the ADF or if you aren’t technical savvy then you probably only need or should attempt to replace the ADF separation pad.
Brother DCP L5502DN cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5502DN separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
