Brother DCP L5500D Document Jam Repair Instructions
Below you will find the Brother DCP L5500D Document Jam Repair Instructions followed by links to purchase the replacement parts to fix problems with the ADF separation pad. These pads seem to last around 50,000 before they start multiple feeding and causing other issues.
A different identified downside to these pads is that they might become detached from the holder assembly. At this point, the paper strikes the upper lip of the holder as it passes through and causes the paper to jam up right underneath the roller assembly. Plainly, replacement of the separation pad is needed once this occurs. Many people think the feed rollers are the problem because the pad goes missing in action and when they search inside they don’t view it so they don’t it should be there. Therefore they assume the feed roller. However, it’s usually just as simple as installing a fresh separation pad.
Currently numerous technicians choose to swap both parts simultaneously. So down below I’ve included both parts for purchase. Now if you only have 50,000 pages from the ADF or if you aren’t tech savvy then you usually only need or should attempt to replace the ADF separation pad.
Brother DCP L5500D cover ASSY, Document stopper Removal
1. Open the ADF cover ASSY. Release the two bosses to remove the ADF cover ASSY
from the ADF unit.
2. Release the two bosses to remove the document stopper from the ADF unit.
Brother DCP L5500D separation holder ASSY Removal
1. Remove the taptite cup B M3x10 screw to remove the ADF separation holder ASSY
from the ADF unit.
Below you will find a link to the roller replacement instructions if you decide that needs to be done too.
