Canon imageRUNNER 1730iF E531 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730iF E531 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730iF E531 8001 Error Code
E531 8001
Description :
Staple Motor (M9) error
Causes :
The Stapler failed to move from the Staple HP Sensor (S11) within the staple execution time (0.45sec).
Solutions :
1. Check the connector connection of the Staple Unit.
2. Check for open circuit of the Harness of the Staple Unit.
3. Replace the Staple Unit.
4. Replace the Finisher Controller PCB.
Bear in mind, not every error is precisely identical. What remedies the difficulty one occasion might not resolve it the next time. While the content in this page is inspired by the service manual and usually ought to get your equipment up and running, on occasion additional variables might be in play.
If you are looking at this post and have knowledge of this malfunction and want to make a contribution please be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the difficulty then I will reply.
