Canon imageRUNNER 1730 E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E014 0002 Error Code
E014 0002
Description :
Fixing Motor (M1) rotation error
Causes :
Detection was performed every 100 msec during the drive (after the lock detection) and the lock signal was not detected 5 times in a row (in 500 msec).
Solutions :
1. Check the connector connection between the Fixing Motor and the DC Controller PCB (J203).
2. Replace the Fixing Motor (M1).
3. Replace the DC Controller PCB (PCB1).
Always remember, not every error is completely alike. What remedies the condition one occasion may possibly not solve it the next occasion. While the information in this written piece is taken from the service manual and oftentimes ought to get your unit working, in some cases additional factors might be in play.
If you are looking at this article and have information about this malfunction and would wish to make a contribution be sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have knowledge about the issue then I will respond.
