Canon imageRUNNER 1730 E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E110 0002 Error Code
E110 0002
Description :
Laser Scanner Motor error
Causes :
After the speed lock of the Laser Scanner Motor had been settled, the speed lock signals showed unlocked status 10 times in a row at intervals of 100 msec.
When the same status was detected again after executing an error retry.
Solutions :
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
Always remember, not every error is completely the same. What remedies the trouble one occasion will possibly not solve it the next occasion. While the information in this blog is obtained from the service manual and most often ought to get your device working, on occasion other elements could possibly be in play.
If you are looking at this blog post and have experience with this error and desire to contribute please be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have experience with the situation then I will answer back.
