Canon imageRUNNER 1730 E004 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E004 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E004 0000 Error Code
E004 0000
Description :
Thermistor disconnection detection error
Causes :
Connector disconnection was detected for 30 msec on end.
Solutions :
1. Check the connector connection. (J206 on the DC Controller PCB, J101 on the Power Supply PCB)
2. Replace the Fixing Assembly.
3. Replace the DC Controller PCB (PCB1).
Canon FM1-B701-000 Fuser (Fixing) Unit – 110 / 120 Volt (Genuine) – $279.95
from: Precision Roller
Canon imageRUNNER 1730 E000, E001, E002, E003, Error Code Reset
Canon imageRUNNER 1730 Fuser Removal and Replacement
Always remember, not every error is absolutely identical. What treats the complication one time may not take care of it the next time. While the advice in this writing is inspired by the service manual and in most cases should get your device functioning, in some cases other reasons may be in play.
If you are looking at this article and have expertise in this malfunction and would like to contribute please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the situation then I will answer.