Canon-imageRUNNER-3025N E064 0005 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E064 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E064 0005 Error Code
E064 0005
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are reading this write-up and have expertise in this problem and would wish to contribute be sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have experience with the problem then I will answer.
Note, not every error is entirely identical. What treats the malfunction one occasion may possibly not solve it the next time. While the information in this blog post obtain from the service manual and oftentimes ought to get your device working, at times additional variables might be in play.
