Home » Canon Repair Articles » Canon-imageRUNNER-3025N E002 0000 Error Code

Canon Repair ArticlesimageRUNNER 3025N

Canon-imageRUNNER-3025N E002 0000 Error Code

admin

May 12, 2017

4 Views 0

SaveSavedRemoved 0

Canon-imageRUNNER-3025N E002 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3025N E002 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Service Manual Instructions for the Canon-imageRUNNER-3025N E002 0000 Error Code

E002 0000
Description :
The rise in temperature of the fixing assembly is faulty.

Causes :
While startup control is under way, the reading of the main thermistor is less than 115 deg C continuously for 400 msec 1.3 sec after it has indicated 100 deg C.
While startup control is under way, the reading of the main thermistor is less than 150 deg C continuously for 400 msec 1.3 sec after it has indicated 140 deg C.

Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.

Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95

If you are reading this short article and have exposure to this malfunction and wish to share please make sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer back.

Note, not every error is absolutely the same. What remedies the issue one time might not exactly get rid of it the next time. While the help and advice in this short article comes from the service manual and most often ought to get your equipment up and running, at times additional variables can be in play.