Canon-imageRUNNER-3025N E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon-imageRUNNER-3025N E110 0003 Error Code
E110 0003
Description :
The scanner motor is faulty.
Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are reading this write-up and have knowledge about this error and desire to make a contribution be sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the trouble then I will reply.
Note, not every error is entirely the same. What fixes the trouble one occasion may possibly not get rid of it the next occasion. While the details in this write-up derives from the service manual and oftentimes ought to get your product working, occasionally additional circumstances can be in play.
