Canon-imageRUNNER-3025N E110 0002 Error Code

 

Canon-imageRUNNER-3025N E110 0002 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3025N E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3025N E110 0002 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3025N E110 0002 Error Code

E110 0002
Description :
The scanner motor is faulty.

Causes :
The speed lock signal indicates a deviation 10 times in sequence at intervals of 10 msec after the signal has indicated a locked state.




Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.


If you are reading this write-up and have exposure to this problem and would like to make a contribution please make sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the problem then I will answer back.

Note, not every error is entirely the same. What fixes the complication one time may not take care of it the next occasion. While the content in this short article is taken from the service manual and typically ought to get your equipment up and running, from time to time other things can be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart