Canon-imageRUNNER-2870 E711 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E711 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E711 0002 Error Code
E711 0002
Description :
There is an error in the IPC communication.
Causes :
The occurrence of an error has been recorded in the error register of the IPC chip 4 times or more within 2 sec.
Solutions :
Check the cable.
If you are reading this article and have exposure to this malfunction and desire to contribute be sure to leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have experience with the issue then I will reply.
Keep in mind, not every error is absolutely identical. What fixes the issue one time may not remedy it the next occasion. While the data in this writing derives from the service manual and generally should get your unit up and running, in some cases additional factors could possibly be in play.
