Canon-imageRUNNER-2870 E730 9004 Error Code

 

Canon-imageRUNNER-2870 E730 9004 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2870 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2870 E730 9004 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2870 E730 9004 Error Code

E730 9004
Description :
There is a PDL software error.

Causes :
There is an error in the communication (PAI) with an external controller.




Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.


If you are reading this article and have knowledge of this error message and would wish to share be sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have information about the problem then I will answer.

Keep in mind, not every error is completely the same. What treats the problem one occasion might not resolve it the next occasion. While the advice in this short article obtain from the service manual and oftentimes should get your equipment working, in some cases other factors may be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart