Canon-imageRUNNER-2870 E261 0000 Error Code

 

Canon-imageRUNNER-2870 E261 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2870 E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2870 E261 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2870 E261 0000 Error Code

E261 0000
Description :
The zero-cross signal is faulty.

Causes :
When the relay is on, the zerocross signal is not detected for 500 msec or more.




Solutions :
Replace the AC driver PCB.
Replace the DC controller PCB.



If you are looking over this write-up and have information about this error and wish to make a contribution be sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will respond.

Just remember, not every error is simply identical. What fixes the malfunction one occasion might not exactly solve it the next time. While the guidance in this posting is obtained from the service manual and normally should get your piece of equipment operating, sometimes other things could possibly be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart