Canon-imageRUNNER-2870 E710 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E710 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E710 0002 Error Code
E710 0002
Description :
There is an error in the initialization of the IPC.
Causes :
When the main power is turned on, the communication IC (IPC) on the DC controller PCB cannot be initialized.
Solutions :
Check the cable.
If you are reading this article and have exposure to this error message and would wish to contribute you should leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will answer.
Keep in mind, not every error is absolutely alike. What remedies the condition one occasion might not take care of it the next occasion. While the advice in this blog hails from the service manual and in most cases ought to get your machine up and running, in some cases additional variables can be in play.
