Canon-imageRUNNER-2270 E248 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E248 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E248 0000 Error Code
E248 0000
Description :
The backup memory is faulty.
Causes :
[Cause] A check error has occurred on the backup SRAM board.
[Location] bottom ROM
[Timing of Detection] once when the boot ROM is started up
Solutions :
1. Check the presence/absence of a backup SRAM PCB.
2. Disconnect and then connect the backup SRAM PCB.
3. Replace the backup SRAM PCB with a new one.
If you are looking at this short article and have experience with this problem and would wish to make a contribution please leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the issue then I will answer.
Bear in mind, not every error is precisely the same. What treats the malfunction one occasion may possibly not resolve it the next time. While the specifics in this piece of content is taken from the service manual and usually should get your machine working, occasionally additional circumstances may be in play.
