Canon-imageRUNNER-2270 E609 E610 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E609 E610 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E609 E610 Error Code
E609 E610
Description :
The HDD coding key is faulty.
Causes :
The SRM/PCB is faulty.
The battery has become exhausted,leading to loss of SRAM contents.
Solutions :
Try step 1); if it fails, try step 2).
1) Turn off and then back on the power switch to generate the key once again.
2) If the same error still continues, replace the board on which the SRAM is mounted.
(Keep in mind that doing so will lead to loss of all user data.)
If you are looking at this short article and have knowledge of this malfunction and wish to contribute please make sure to leave a comment below. Or, if you have read this article and have additional questions then ask. If I have knowledge about the trouble then I will reply.
Do not forget, not every error is absolutely identical. What corrects the malfunction one time may not resolve it the next occasion. While the material in this piece of content is obtained from the service manual and in most cases ought to get your product operating, sometimes additional variables might be in play.
